BLOCKIMPEX 진공 함침 기술이 적용된 고조파 필터로 우수한 부식 방지 및 4% uK 라인 리액터 대비 전압 강하가 발생하지 않습니다.
다수의 컨버터를 대상으로 하는 메인 노이즈 필터로 도 사용 할 수 있습니다.
Hardly any intermediate circuit voltage dip by comparison with a 4 % uK line reactor. Very good corrosion protection and low noise thanks to BLOCKIMPEX vacuum impregnation. Use of the HF1K as a central sum filter for multiple converters possible
독일 제조 완제품. Finished filter from Germany
CE/UL 인증 고조파 필터. CE / UL Certified harmonic filters
IEEE 519-1992, EN 61000-3-2, EN 61000-3-12 기준 준수. Compliance with IEEE 519-1992, EN 61000-3-2, EN 61000-3-12
정격에서 역률 cos(phi) >0.95. COS(phi)>0.95 at rated current
General Data
Rated voltage 3 x 400 Vac
Rated current 3 x 10.00 -3 x 144.00 A
THD-I 8% in rated operation
Load rated capacity 5.5 - 90 kW
Insulation class H
Ambient temperature -10 ℃ to +45 ℃
Degree of protection IP 00
특징(Features)
사양(Specification)
자료(Brochure)
Advantages
Sinusoidal current consumption from the mains in devices with uncontrolled B6U diode rectifiers
compliance with EN 61000-3-2, EN 61000-3-12
Support in the compliance with IEEE 519, D-A-CH-CZ
Cos(phi)>0, 95 at rated current
Hardly any intermediate circuit voltage dip by comparison with a 4 % uK line reactor
Harmonic filter with minimum capactive idle reactive power
Very good corrosion protection and low noise thanks to BLOCKIMPEX vacuum impregnation
Operation at 50 - 60 Hz possible
Use of the HF1K as a central sum filter for multiple converters possible
P-P 전압을 정현파로 바꿔주는 필터로 모터 권선을 소손 시키는 피크 전압이 감소 되며 모터 수명이 상당 부분 증가하게 됩니다.
BLOCK Sine Wave Filter converts the phase-to-phase voltages into a sinusoidal. Thus the voltage peaks that are harmful for the motor windings are suppressed, the motors’ operating life significantly increase.
독일 제조 완제품. Finished filter from Germany
CE / UL 인증 고조파 필터. CE / UL Certified harmonic filters
모터 과전압 방지. Prevention of over voltages on the motor
긴 모터 케이블 적용 가능. Long cable lengths possible
모터 노이즈 감쇄. Reduction in motor noise
케이블 전자기 노이즈 감소. Reduction in line-borne and field-borne emitted interference
모터 손실 경감. Reduction in motor losses
General Data
Rated voltage 3 x 400 Vac
Rated current 4 - 480 A
For motor rated output 1.5 - 260kW
For switching frequencies of 4 to 8 kHz
Rated frequency from 0 to 150 Hz
Insulation class H
Maxinum ambient temperature 40 ℃
Degree of protection IP 00
특징(Features)
사양(Specification)
자료(Brochure)
Advantages
Prevention of overvoltages on the motor
Long cable lengths possible
Reduction on motor noise
Reduction in line-borne and field-borne emitted interference
Reduction in motor losses
Very good corrosion protection and low noise thanks to BLOCKIMPEX vacuum impregnation
Isolating transformer for the safe electrical isolation of the input and output sides. The transformer may be used to set up protective separation as a protective measure in accordance with VDE 0100.
With the TT3 neo BLOCK has focused on the advanced development of the elementary properties, the core and the winding. Simulations and measurements performed by BLOCK development, played a key role in optimizing the transformer design.
Any heat losses which occur during operation are consistently deflected into the ambient air, thanks to the innovative winding architecture. In-depth in-house tests verify the optimized cooling of the TT3 neo with maximum economical properties.
General Data
Rated input voltage 3 x 400 Vac
Rated output voltage 3 x 400 Vac
Rated power 10000 - 630000 VA
Insulation class F
Maximum ambient temperature 40 ℃
Degree of protection IP 00
특징(Features)
사양(Specification)
자료(Brochure)
Advantages
Safe galvanic isolation : Very good corrosion protection and low noise thanks to BLOCKIMPEX vacuum impregnation
Very good discharging of thermal losses by means of optimally arranged cooling channels within the coils